Facade Insulation System

New requirements for construction and repair of facades have led to the need for additional thermal protection of buildings and houses. In this regard, the optimal solution of the problem is external insulation of facades, when a single action saves heat and simultaneously ennobled front facade of the building can be warmed in three ways: – internal insulation – exterior insulation – thermal insulation structure inside the wall. In general, preference is given to systems exterior facade insulation, as these systems have several advantages. This could include the protection of walls against adverse external influences (temperature, atmospheric and biological), also protect the walls from cooling that prevents condensation on internal surfaces, "breathing" walls, and, of course, additional sound insulation and long life. Facade thermal insulation system, depending on the technology of thermal insulation, distinguish the following groups: – light insulation plaster systems – heavy plaster systems insulation – facade systems with kolodtsevoy brickwork and three-layer system – ventilated facades. Particularly acute problem insulation housing is in crisis and steady growth in energy prices. Depending on operating conditions, appearance and customer requirements using various methods of thermal insulation of facades. Most Popular among them the so-called "wet" front or "wet easy, but such a system is called a thin-layer insulation.

This does not mean that a thin layer will give less of an effect. Modern insulating materials such as foam have a density of 5-15 times lower than wood, and, consequently, their thermal conductivity is much lower than hers. These materials provide the desired heat insulating effect at small thickness of the material. "Easy wet "technique consists in bonding to the outer wall with a continuous layer of special glue insulation boards (foam or penolistirol, mineral wool or fiberglass wool). Then, in most cases, boards adheres to the wall with plastic plugs, shaped like an umbrella. Top plate make decorative plaster. To this end, the outer layer of fiberglass reinforced with an adhesive solution, and over the reinforcing layer applied decorative plaster layer. In this case, you can vary the color and texture of plaster.

There are numerous types of finishes: "bark", "coat", "sprayed" and colors for painting has more than 10 thousand shades. Thus, the "easy wet" method of insulation of the facade is considered one of the most effective ways to reduce energy consumption for heating buildings. Decorative plaster grafito ideal for finishing insulated facades of insulation boards (foam or polystyrene). Finish insulated foam facade allows decorate his imitation of natural stone or wood, which is impossible with natural stone because of its weight. Perfect match for decoration of graphite with the most commonly used on the facades of buildings insulated with plaster bark beetle.